- “A new simple index for the estimation of energy impacts on environment”, Environmental Engineering & Management Journal, in press, (2016).
- “Dispersion of Volatile Organic Compounds (VOCs) Emissions from a Biofilter at an Electronic Manufacturing Facility”, Environmental Progress & Sustainable Energy, Wiley (publisher) , Revision Submitted on October 29, 2016.
- “Visible-solar-light-driven photo-reduction and removal of cadmium ion with Eosin Y-sensitized TiO 2 in aqueous solution of triethanolamine”, Separation and Purification Technology. 174, 109-115, (2017).
- “General optimization model for the energy planning of industries including renewable energy: A case study on oil sands”, AIChE Journal, Volume 63, Issue 2, Pages 610–638, (2017).
- “Some Remarks on the Evaluation of m-Cresol and Pyridine Biodegradation Kinetics”, International Journal of Environment and Waste Management, Inderscience (publisher) Revision Submitted on July 23, 2016
- “Mathematical modeling of T-cells activation dynamics for CD3 molecules recycling process”, in press, (2017).
- “Dynamic population balance and flow models for granular solids in a linear vibrating screen”, AIChE Journal , Volume 62, Issue 11, Pages 3889–3898, (2016).
- “Modeling the Dispersion of NOx And SO2 Emissions from a Proposed Biogas Producing Facility”, Global NEST Journal, 18(4), 674-689, (2016).
- “Radon in the Indoor Environment”, Fresenius Environmental Bulletin, 25(10), 4409-4438, (2016).
- “Optimal Wind Distributed Generation Planning in Active Distribution Networks Based on Possibilistic-Probabilistic PEVs Load Modeling, IET Generation, Transmission & Distribution”, IET Digital Library, pages 1-11, doi: 10.1049/iet-gtd.2016.0778, (2016).
- “Enhanced protective properties and UV stability of epoxy/graphene nanocomposite coating on stainless steel”, eXPRESS Polymer Letters Vol.10, No.12, 1034–1046, (2016).
- “Power-to-gas in a demand-response market”, International Journal of Environmental Studies, Volume 73, Issue 3:Natural Gas and Energy Storage, page 390-401, doi:10.1080/00207233.2016.1165479, (2016).
- “Corrosion inhibition of copper in sodium chloride solution using polyetherimide/graphene composites”, The Canadian Journal of Chemical Engineering, in press, (2016).
- “Dynamic Optimization of Lurgi Type Methanol Reactor Using Hybrid GA-GPS Algorithm: The Optimal Shell Temperature Trajectory and Carbon Dioxide Utilization”, Industrial & Engineering Chemistry Research, 55 (5), 1164-1173, (2016).
- “Wastewater Treatment with Microbial Fuel Cells: A Design and Feasibility Study for Scale-up in Microbreweries”, Journal of Bioprocessing & Biotechniques, 6(1), 1-6, (2016).
- “Analysis of Economic, Environmental and Societal Benefits 0f The Use 0f Biomass as Manufacturing Feedstocks”, Proceedings of the ICPESS 2016-ISTANBUL, pages 35 – 42, 24-26 August, (2016).
- Optimization of an electrolytic hydrogen for the Sarnia-Lambton upgrader”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016), (Awarded Best Track Paper for the 2016 IEOM Detroit Conference).
- “Design optimization of a microreactor for the production of biodiesel”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016), (Awarded Best Track Paper for the 2016 IEOM Detroit Conference).
- “Optimizing Cleaning Schedules of Heat Exchanger Networks”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- “Techno-economic analysis of a peatland gasification process for methanol synthesis and power production”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- “Design and Optimization of a CO2 Pipeline Network for the Province of Alberta”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- “Technical and Economic Feasibility Study of Methanol Production from Flaring Gas in Iran”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- Steel 304 by Epoxy-Graphene Composite using Factorial Experimental Design”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- Viscosity Models for Multi-Component Liquid Mixtures”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, September 23-25, (2016).
- Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, March 8-10, (2016).
- Processes”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, March 8-10, (2016).
- Products Syntheses from Oil Palm Empty Fruit Bunch (EFB)”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, (2016).
- Plug-In Hybrid Electric Vehicles”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, (2016).
- Radiative Sections of Fired Process Heaters”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, (2016).
- Graphic User Interface Models for Costing and Material Balances”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Modeling and Optimization of Protein Expression: Statistical Methods and Metabolic Flux Analysis for Optimization of Recombinant Protein Producyionby Fungal Platforms”, LAP lambert Academic Publishing, ISBN-13: 978-3838324395, ISBN-10: 3838324390, 180 pages, (2010).
- K. Al-QahtaniG and A. Elkamel: “Planning and Integration of Refinery and Petrochemical Operations”, Wiley-VCH Verlag, ISBN 978-3-527-32694-5, 195 pages, (2010).
- “Environmentally Conscious Fossil Energy Production”, John Wiley & Sons, Inc., ISBN 978-0-470-23301-6, 354 pages, (2010).
- “Optimization Strategies: Petroleum Refinery Planning under Uncertainty”, VDM Verlag Dr. Mueller e.K Publishing House, ISBN-10: 3836477920, ISBN-13: 978-3836477925, 328 pages, (2008).
- “Chapter 28 - Air Quality Management in Electronic Industries”, In: Miguel de la Guardia and Sergio Armenta, Editor(s), Comprehensive Analytical Chemistry, Elsevier, Volume 73, Pages 765-784, (2016).
- Chapter 23, pages 679 – 692, “Solar Energy Integration in the Upstream Oil Supply Chain”, in ASTM Publication MNL73 Exploration and Production of Petroleum and Natural Gas, ASTM-Books, Editor: M.R. Riazi, ASTM Books, (2016).
- Chapter 2, pages 21 – 53, “Prospective Outlook on World Oil and Gas Reserves and Long-Range Planning Systems”, in ASTM Publication MNL73 Exploration and Production of Petroleum and Natural Gas, ASTM-Books, Editor: M.R. Riazi, ASTM Books, (2016).
- Chapter 19, pages 529 – 569, “Environmental and Safety Issues and Solutions Related to Oil and Gas Production”, in ASTM Publication MNL73 Exploration and Production of Petroleum and Natural Gas, ASTM-Books, Editor: M.R. Riazi, ASTM Books, (2016).
- Chapter 32: “Modern Water Reuse Technologies”, pages 383 – 393, in the book “URBAN WATER REUSE HANDBOOK (Editor. Saeid Eslamian), CRC Press-Taylor and Francis Publication, (2016).
- Chapter 24: “Carbon Management in Coal Industry”, pages 459 – 478, in the book “COAL PRODUCTION AND PROCESSING TECHNOLOGY”, Editors. M.R. Riazi and R. Gupta, CRC Press, (2015).
- “Photocatalytic Processes for the Removal of Dye”, in Heavy Metals in Green Chemistry for Dyes Removal from Wastewater: Research Trends and Applications (Ed. Sanjay K. Sharma), Scrivener Publishing LLC, pages119-137, (2015).
- "Photocatalytic Processes for the Removal of Toxic Metal Ions", Chapter 2 in Heavy Metals in Water: Presence, Removal and Safety (Ed. Sanjay K. Sharma), Royal Society of Chemistry, 25-43, (2014).
- “Computer-aided product design of wheat straw polypropylene composites,” Chapter 11 (pages 237-252) in Modeling and Prediction of Polymer Nanocomposite Properties, Vol. 4 (9783527331505), Wiley-VCH, Editor: Vikas Mittal, (2013).
- “Parameter estimation in phase equilibria calculations using multi-objective evolutionary algorithms”, Chapter 9, pages 249-264, in Multi-Objective Optimization: Developments and Prospects for Chemical Engineering, John Wiley & Sons, Editor: Gade Pandu Rangaiah, (2013).
- “Integration of membrane processes for optimal wastewater management”, Chapter 2 (pages 19 - 46) in Wastewater Reuse and Management, Book edited by: Sanjay K. Sharma and Rashmi Sanghi, Springer, (2013).
- “Robust multi-objective genetic algorithm (RMOGA) under interval uncertainty with online approximation,” Chapter 6, pages 157-179, in Multi-Objective Optimization: Developments and Prospects for Chemical Engineering, John Wiley & Sons, Editor: Gade Pandu Rangaiah, (2013).
- “Engineering Economics for Chemical Processes: Profitability Analysis and Cost Estimation”, Chapter 14 (pages 331-354) in Process Plant Equipment Operation, Reliability and Control, Book edited by: Michael Holloway, Chikezie Nwaoha and Oliver A. Onyewuenyi, John Wiley & Sons, (2012).
- “Introduction to Trading, Pricing, and Valuation of Crude Oils and Petroleum Products”, Chapter 23 (pages 577-597) in “Petroleum Refining and Natural Gas Processing”, ASTM International, Editors: M.R. Riazi, S. Eser, J.L. Pena Diez, and S.S. Agrawal, (2013).
- “Environmental Issues Related to the Petroleum Refining Industry”, Chapter 29 (pages 701-716) in “Petroleum Refining and Natural Gas Processing”, ASTM International, Editors: M.R. Riazi, S. Eser, J.L. Pena Diez, and S.S. Agrawal, (2013).
- "Computer Facilitated Generalized Coordinate Transformations of Partial Differential Equations with Engineering Applications", Computer Applications in Engineering Education, 19 (2), pages 365-376, (2011).
- "Incorporating the Systems Approach in Future Undergraduate Chemical Engineering Education Curriculum: Illustration via Computer-Aided Process Simulation Laboratory Exercises", World Review of Science, Technology and Sustainable Development, 14 pages, Accepted, (2008).
- "A New Method for Enhancing Students' Abilities in Team Work and Group Dynamics", Proceedings of the 2nd International Conference on Engineering Education & Training, ICEET-2, Kuwait, 7 pages, April 9-11 (2007).
- "Teaching Industry-Based Intensive Short Courses and its Significant Effects in Keeping up with Current Industrial Trends and Practice", World Transactions on Engineering and Technology Education, Vol. 5, No. 3, pp. 469 - 472.
- “ A MATLAB-Based Modeling and Simulation Program for Dispersion of Multi-Pollutants from an Industrial Stack for the Educational Use in a Course in Air Pollution Control”, Computer Applications in Engineering Education, Vol. 14, Issue 4, pp. 300 - 312.
- “Importance of Statistics in Everyday Life of the Practicing Engineer”, Kuwait Journal of Engineering Education, Vol. 30, pp. 9-13 (1998).
- “Chemical Engineering Technologies and Education for Developing Countries”, Tunisian Scientific Magazine, Vol. 14, pp. 16 – 29 (1999).
- “Producing Ultra-low Interfacial Tension at the Oil/Brine Interface”, Final Report for Project EC072, Submitted to Research Management Unit, Kuwait University, October 1999.
- “Optimal Hydrate Inhibition Policies”, Final Report for Project EPP020, Submitted to the Research Management Unit, Kuwait University, October 1999.
- “ Finding the Essential Characteristics of an Optimal Schedule”, Final Report for Project EC085, Submitted to Research Management Unit, Kuwait University, March 1999.
- “A Neural Network Model for the Prediction of Water Influx of Edge-and-Bottom-Water Drive Reservoirs”, Final Report for Project EPP017, Submitted to the Research Management Unit, Kuwait University, February 1999.
- “ Modeling Refinery Operations Using Artificial Neural Networks”, Final report for Project EC073, Submitted to Research Management Unit, Kuwait University, January 1999.
- “Producing Ultra-low Interfacial Tension at the Oil/Brine Interface”, Progress Report for Project EC072, Submitted to Research Management Unit, Kuwait University, March 1998.
- “A Decision Support System for Investing in pollution Control Technologies”, Final Report for Project EC071, Submitted to Research Management Unit, Kuwait University, October 1998.
- “Synthesis and Kinetic Analysis of Liquid Crystalline Compounds”, Final Report for Project EC070, Submitted to Research Management Unit, Kuwait university, September 1997.
- “A Neural Network Prediction Model of Fluid Displacements in Porous Media”, Final Report for Project EC067, Submitted to Research Management Unit, Kuwait University, August 1996.
- “Gamma Stain Remover: Formula Optimization, Stability, and Potential Use as a Laundry liquid Soaker”, Procter and Gamble, Internal Report, 1994.
- “In our Additives and Pretreaters Formulas: More not of the Same is Strategically Better than More of the Same”, Procter and Gamble, Internal Report, 1994.
- “The Perfect Chemistry + a Dual-Chambered Package = An Unbeatable Combination”, Procter and Gamble, Internal Report, 1994.
- “Introducing New Peroxide Activators in Gamma and Apollo Products for Improved Performance”, Procter and Gamble, Internal Report, 1994.
- “An Enhanced Uniform Discretization Model for Process Scheduling”, CIPAC Report, School of Chemical Engineering, Purdue University, (1993).
- “A Decomposition Heuristic for Scheduling the General Batch Chemical Plant”, CIPAC Report, School of Chemical Engineering, Purdue University, (1993).
- “Optimization of Energy Usage for a Fleet-Wide Powwer Generating System Under carbon Mitigation options”, Invited Seminar at the International Institute for Carbon-Neutral Energy Research, Kyushu university, Japan, February 19, (2016).
- “Modeling and Optimization of Interconnected Systems to Improve Economic and Sustainability Considerations: Applications to Energy Systems and Process Operations”, Invited Seminar, Hitit University, Corum, Turkey, May 2nd, (2016).
- “Modeling and Optimization of Interconnected Systems to Improve Economic and Sustainability Considerations: Applications to Energy Systems and Process Operations”, Invited Seminar, Gazi University, Ankara, May 5, (2016).
- ‘Modelling and Optimization of Biomass Supply Chain for Energy, Chemicals and Materials Productions”, Keynote Speaker at The Second International Exchange and Innovation Conference on Engineering & Sciences (IEICES) , Kyushu University, Japan, October 14, (2016).
- “Analysis of Economic, Environmental and Societal Benefits 0f The Use 0f Biomass as Manufacturing Feedstocks”, paper Presented at the ICPESS 2016-ISTANBUL, 24-26 August, (2016).
- “Optimal Design of Standalone Micro-Grid Considering Reliability and Investment Costs”, Presented at the CIRED Workshop, June14-15, Helsinki, Finland, (2016).
- “Superstructure Optimization of Multiple Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Stochastic Dynamic Optimization of Engineering Processes”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances”, International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, (2016).
- “Decarbonizing Transportation through the use of Power-to-Gas for Oil Refining Operations”. Paper presented at the 2016 4th IEEE International Conference on Smart Energy Grid Engineering, SEGE 2016, 231-235, (2016).
- “Design Optimization of Multi-Energy Hubs, Taking into Account Environmental”, Energy and Water, (EAW), Jun 22-23, University of Windsor, ON, Canada, (2016).
- “Effect of Plug-in Electric Vehicles on the Optimal Operation of Residential Energy Hubs”, Energy and Water (EAW), Jun 22-23, 2016, University of Windsor, ON, Canada.